Quick comparison between:Blisstool LTC64X v3
Minelab Explorer II
Use search box below to compare Blisstool LTC64X v3 with something else
|Options||Blisstool LTC64X v3||Minelab Explorer II|
|Battery Type||Sealed||8 AA|
|Operating frequency||8 kHz.||1.5 - 100 kHz.|
|Tone ID||Custom||Multi Tone|
|Ability to change coils||Yes||Yes|
|Ground balance||Auto, Manual||Auto|
|Waterproof||Coil only||Coil only|
|Warranty||3 Years||2 Years|
|Number of Reviews|| 2
|Avg. User Rating||2.60||4.33|
|Avg. Durability Rating||3.50||4.40|
|Avg. Ease of Use Rating||2.00||4.00|
|Avg. Depth Rating|
Most helpful review for Blisstool LTC64X v3Its good for parks.
I recently purchased this Blisstool detector and have got out for few times now. So far what I have read is that no good for public parks or areas with a lot of trash, however I have gone to few local parks and some others in the Longview area and so far I have been successfully hunting with it.
On my first day out with it it took me little of time to set the ground balance correctly but once I tuned in it was just great. Down in Longview I found a silver earing about 7" down and on each target that I found I was rising the coil to see how dip from the coil will it see each target and I am impressed with the depth of this machine.
Each time that I have been able to use it's just little less hard to set the balance correctly and on the Manual mode it's just great to use it.
I have to said that If there are targets dipper than 12" inches this will get them with no problem at all. That same day I got a copper washer that was about 13" down and it sound loud and solid on each pass.
On my next trip to a different park in Vancouver I found a Nice 925 Italy silver pendent and few feet away I found the chain for it, the pendent was at 7" and the chain at 4".
So on my opinion it's a great detector, the only thing that I don't like is the fact that it's a single tone machine but the discrimination to nails it's great and compensates for the one tone future.
The discrimination is so good that it has a discrimination depth and it will discriminate correctly down to 10", more than 11" the discrimination is not so good but the tone will not be as good as with a non ferrous target.
Abel Villasenor from Camas Wa.
Read all reviews for Blisstool LTC64X v3
Most helpful review for Minelab Explorer IIExplorer ll takes time.
First off...I have tried most detectors. Even when I start liking another detector, I go out with the Explorer again... and it amazes me again. In my opinion, this is probably the best overall detector made for FINDING items in the ground at depth. When I first got/used the Exp. ll, I was ready to wrap it around a tree. The thing was constant noise!!! Now, I'd hate to be without it. I had a lot of encouragement from friends to give it time. Boy were they right! Rather than bore you with my stories, I want to give some prospective Exp. owners a few opinions and pointers...
If you are impatient and/or just a casual coin hunter, don't bother. There are a lot of light, short learning curve, detectors that will do well. Click the back arrow and look at something else.
Now, those of you still here, here goes...
The Exp. machine is superior to others in most conditions. Minerals don't seem to affect it. Get the probe. It helps locate targets in a deep hole.
Know that when you get the Exp, it will take time...it has a steep learning curve and by that let me say the learning curve doesn't mean alot to learn. It means it takes a good while for your brain to process and understand what you are hearing in the ground and know a good signal when you hear it.
Next, You HAVE TO HUNT SLOW!!! I can't say this enough. Slow means slower. Alot of the noise people complain about hearing is just all of the junk in the ground and going over it too fast. The slower you go, the more separated the sounds are, and easier to pick out.
The Exp. is very versitale, but not complicated. Once you get it set the way you want to hunt, it is pretty much a "turn on and go" machine. It is great in the ground or on the beach.
Again, if you are just wanting the 4-5" coins, most all machines will do that. If you are wanting to find coins the other detectors can't reach, the Exp. is for you. Just yesterday, I found a ring and two wheaties at about 7-8" (highly mineralized) in an old park in a small area that has been POUNDED FOR YEARS!!! I went slower than slow and was rewarded for doing that.
The Exp. is heavy. I recommend shortening the rods and hunt closer to your feet. In other words, don't extend the detector out in front of you. Or get a bungie strap to help hold it. Make sure you have NO metal in your shoes!
Once learned, this detector will increase your finds and go for the old stuff. It will, and has to, take time to learn it. There are no short cuts. Your brain has to have time hearing the machine's sounds to reprogram itself in to knowing how to, and when to, recognize a signal and what it means. That WILL NOT happen over night.
For those of you that want the best...this is what it takes. If you quit too soon, that's OK...it is just more for us other Explorer owners. The forums have a wealth of info and many users to help anyone. The only reason I scored it at four stars is because it is a little heavy. Good luck to you and Happy Hunting!
Chris in MO from Mid Missouri
Read all reviews for Minelab Explorer II