Quick comparison between:

Teknetics T2 Ltd
and
Minelab Explorer II


Use search box below to compare Teknetics T2 Ltd with something else

Teknetics T2 Ltd
Minelab Explorer II
Feature comparison between Teknetics T2 Ltd and Minelab Explorer II
Options Teknetics T2 Ltd Minelab Explorer II
Detector Type Coin and Relic Detector Coin and Relic Detector
Price $1250 $1200
Manufactured in 2009 2003
Battery Type 4 AA 8 AA
Weight (Lbs.) 3.5 4.1
Operating frequency 13 kHz. 1.5 - 100 kHz.
Display Yes Yes
Backlight No Yes
Target ID Audio+Numeric Audio+Numeric
Tone ID 4 Tones Multi Tone
Search Modes
  • Disc.
  • All Metal
  • Pinpoint
Ability to change coils Yes Yes
Ground balance Auto, Manual Auto
Waterproof Coil only Coil only
Warranty 5 Years 2 Years
Number of Reviews graph 5
graph 1
graph 2
graph 67
graph 13
graph 6
graph 4
graph 7
Avg. User Rating 4.38 4.33
Avg. Durability Rating 4.50 4.40
Avg. Ease of Use Rating 4.38 4.00
Avg. Depth Rating
Depth value
Depth value

Most helpful review for Teknetics T2 Ltd

6 out of 10
I own 20 different detectors and have been hunting for 20 years. Small coil works well and the 11 DD is nice for covering a lot of ground. The built in speaker is a toy compared to a Whites unit. You cant get any depth unless you crank it up and when you do it chatters all over the place. No back light, no memory, and very cheaply built, not worth the 1K. It just sits in a box in the garage because if I try and sell it I would loose $600 on it.
Larry from AZ

Thumbs up! 29
Read all reviews for Teknetics T2 Ltd

Most helpful review for Minelab Explorer II

Explorer ll takes time.
First off...I have tried most detectors. Even when I start liking another detector, I go out with the Explorer again... and it amazes me again. In my opinion, this is probably the best overall detector made for FINDING items in the ground at depth. When I first got/used the Exp. ll, I was ready to wrap it around a tree. The thing was constant noise!!! Now, I'd hate to be without it. I had a lot of encouragement from friends to give it time. Boy were they right! Rather than bore you with my stories, I want to give some prospective Exp. owners a few opinions and pointers...

If you are impatient and/or just a casual coin hunter, don't bother. There are a lot of light, short learning curve, detectors that will do well. Click the back arrow and look at something else.

Now, those of you still here, here goes...

The Exp. machine is superior to others in most conditions. Minerals don't seem to affect it. Get the probe. It helps locate targets in a deep hole.

Know that when you get the Exp, it will take time...it has a steep learning curve and by that let me say the learning curve doesn't mean alot to learn. It means it takes a good while for your brain to process and understand what you are hearing in the ground and know a good signal when you hear it.

Next, You HAVE TO HUNT SLOW!!! I can't say this enough. Slow means slower. Alot of the noise people complain about hearing is just all of the junk in the ground and going over it too fast. The slower you go, the more separated the sounds are, and easier to pick out.

The Exp. is very versitale, but not complicated. Once you get it set the way you want to hunt, it is pretty much a "turn on and go" machine. It is great in the ground or on the beach.

Again, if you are just wanting the 4-5" coins, most all machines will do that. If you are wanting to find coins the other detectors can't reach, the Exp. is for you. Just yesterday, I found a ring and two wheaties at about 7-8" (highly mineralized) in an old park in a small area that has been POUNDED FOR YEARS!!! I went slower than slow and was rewarded for doing that.

The Exp. is heavy. I recommend shortening the rods and hunt closer to your feet. In other words, don't extend the detector out in front of you. Or get a bungie strap to help hold it. Make sure you have NO metal in your shoes!

Once learned, this detector will increase your finds and go for the old stuff. It will, and has to, take time to learn it. There are no short cuts. Your brain has to have time hearing the machine's sounds to reprogram itself in to knowing how to, and when to, recognize a signal and what it means. That WILL NOT happen over night.

For those of you that want the best...this is what it takes. If you quit too soon, that's OK...it is just more for us other Explorer owners. The forums have a wealth of info and many users to help anyone. The only reason I scored it at four stars is because it is a little heavy. Good luck to you and Happy Hunting!

Chris
Chris in MO from Mid Missouri

Thumbs up! 84
Read all reviews for Minelab Explorer II