Quick comparison between:

Teknetics EuroTek
and
Teknetics Alpha 2000


Use search box below to compare Teknetics EuroTek with something else

Teknetics EuroTek
Teknetics Alpha 2000
Feature comparison between Teknetics EuroTek and Teknetics Alpha 2000
Options Teknetics EuroTek Teknetics Alpha 2000
Detector Type Coin and Relic Detector Coin and Relic Detector
Price $160 $200
Manufactured in 2013 2010
Battery Type 9V 9V
Weight (Lbs.) 2.5 2.2
Operating frequency 7.81 kHz. 7.8 kHz.
Display Yes Yes
Backlight No No
Target ID 99 Segment+Audio Numeric
Tone ID 2 Tones 3 Tones
Search Modes
  • Discriminate
  • Discriminate
  • Motion All Metal
  • Pinpoint
Ability to change coils Yes Yes
Ground balance Auto Auto Preset
Waterproof Coil only Coil only
Warranty 5 Years 5 Years
Number of Reviews graph 1
graph 2
graph 1
graph 1
Avg. User Rating 5.00 4.25
Avg. Durability Rating 5.00 4.50
Avg. Ease of Use Rating 5.00 5.00
Avg. Depth Rating
Depth value
Depth value

Most helpful review for Teknetics EuroTek

Basic eurotek not pro
Basic Eurotek not the pro, well I picked this machine up for £60 going cheap hardly ever used, coil is push fit the coil is made by modern technology... This is a overlooked detector, discrimination is superb, depth with the mono coil 6 inches to 7 inches puts in on par with the Tesoro compardre but better on sounds and with a screen.

Now first thing I decided since I got it so cheap was to look for another coil for it... Which I did, found the bounty hunter coil 11 inch and it works, boy oh boy does it work WoW transforms the Euorotek completely.. Only thing that changed was the id numbers on the screen which I soon learnt to id myself.
Brilliant machine. Due to the cost of what I paid I personally decided to change the coil may be not every persons choice however it worked for me, cannot speak for others...

In all I'm very happy!
John from Uk

Thumbs up! 0
Read all reviews for Teknetics EuroTek

Most helpful review for Teknetics Alpha 2000

Teknetics Alpha review
Took the Alpha to an old ball field for a few hours. The site was on a slope were the old bleachers had been tore down. Iron was everywhere. Important to note, that is why I chose to run the discrimination wide open. If the detector can id iron then there is less chance of masking or iron sounding like a good target.

The detector ran very smooth at full sensitivity with no chatter. I tested the EMI issue under power lines and the field light transformers and no problems at all. Honestly I was very surprised. Early on the Alpha had problems with EMI. But Teknetics fixed this with heavier coil cable. The "56" nickle I doug was actualy showing 5c on the display. 4-5 inches down in the red clay here. I was spot on with the pinpointing also. As I am use to Tesoro's I just X'ed the spot. Although nothing earth shattering was found by me I feel this detector is worth more than it's price. No ron, none no nails or can slaw. And trust me it was everywhere. It likes pulltabs. That is a good thing to me because it will like gold too.

The dime I found was proof that leaving the disc. open helps find good things in iron. I got the low tone before and after the small high tone. I thought I better slow down my swing and listen. Sure enough I could here a hight tone between the two low tones. So I dug and out popped a clad dime. Now I'm impressed. Depth is not an issue either. The last target I dug was a memorial at 7" next to the side walk. Are their any bad things with this detector? Not realy, for 200.00 it can't be beat IMHO. The stock 8" coil is ok but I am getting a 5x10 DD to realy enhance this detector. HH
Jim D. from North Georgia

Thumbs up! 69
Read all reviews for Teknetics Alpha 2000